Go to Top

Accessories

Electronic Volume Converters Dataloggers Telemetry and Communication Project Sensors Device Archives

Full portfolio of accessories available to accomplish your solution.

Power supply JBZ-01

Power supply JBZ-01

Intrinsically safe power supply JBZ-01 designed for assembly on DIN bar 35 mm. Power supply serves as external power supply for electronic volume corrector ELCOR-94.

Power Supply JBZ-02

Power Supply JBZ-02

Intrinsically safe power supply JBZ-02 designed for assembly on DIN bar 35 mm with possibility of accumulator backup. This power supply serves as external power supply for Elgas s.r.o. devices such as ELCOR-2, microELCOR and xELCOR/xDATCOM series.

Power Supply JBZ-03

Power Supply JBZ-03

JBZ-03 intrinsically safe power supply serves as external power supply for gas volume corrector miniELCOR and GPRS communicator AMR1.

Power Supply JBZ-04

Power Supply JBZ-04

JBZ-04 intrinsically safe power supply serves as external power supply for gas volume correctors with integrated GSM/GPRS modem – midiELCOR or maxiELCOR.

Current loop CL-1 Module

Current loop CL-1 Module

CL-1 Current Loop module serves as a converter of digital signal to current output signal 4-20mA. Module can be connected to ELCOR-2 or xELCOR/xDATCOM series

DATCOM-K1

DATCOM-K1

Intrinsically safe communication interface DATCOM-K1 can be connected to ELCOR-2, microELCOR-2 or xELCOR/xDATCOM series. Provides RS232/RS485, baud rate and protocol coversion.

DATCOM-K3

DATCOM-K3

Intrinsically safe communication interface DATCOM-K3 can be connected to ELCOR-2, microELCOR-2 or xELCOR/xDATCOM series. DATCOM-K3 provides RS232/RS485 conversion and intrinsically safe power supply for connected devices.

Three way tap DN3 PN-100

Three way tap DN3 PN-100

Ball cock with hand lever control DN 3 PN 100. Usable for all liquids and gases non-aggressive towards seal of material NBR., pressures to 100 bar, approved SZ 202 for mounting in any position.

HIE-03 infrared head

HIE-03 infrared head

RS232 infrared optical head HIE-03 can be used for communication with Elgas s.r.o. devices. HIE-03 has been designed according to EN 62056-21 standard (former IEC-1107 standard) and can communicate with baud rate up to 38400 Bd.

HIE-04 Infrared Head

HIE-04 Infrared Head

USB infrared optical head HIE-04 can be used for communication with Elgas s.r.o. devices. HIE-04 has been designed according to EN 62056-21 standard (former IEC-1107 standard). HIE-04 can communicate with baud rate up to 38400 Bd.

Telemetric power supply box TENAS-01

Telemetric power supply box TENAS-01

Telemetric power supply box TENAS-01 Telemetric and power supply box TENAS-01 is an electrical device serving the purpose of gas-volume corrector ELCOR-94 and data logger DATCOM accessory in order to extend their usability.

Telemetric box TES-01

Telemetric box TES-01

The telemetric box TES-01 ensures remote communication with the electronic battery powered gas volume corrector µ-ELCOR. The box shall be located outside hazardous (explosive) area. The communication is via dialled connection by means of a GSM modem, which constitutes a part of the box TES-01.

 

Share